Mud mixing pump from Aipu solids control

Aipu solid control manufactures two types mud mixing pump, one is the jet mixing pump the other is the swirl hopper pump. Different type has different structure, working principle, application and so on.

Jet mixing pump is a new type equipment that is designed by venture tube and the original jet nozzle combination. Not only simple in structure, but also its feasibility is strong, can meet the 1500m to 9000m drilling mud aggravate and preparation. At the same time we also can make double jet mud mixing pump according to the customers’ request.

The common models of jet mixing pump manufactured by Aipu including SLH150×50, SLH150×45, SLH150×35, different model number means different handing capacity, working pressure, dimension, weigh and so on. The common models of swirl hopper pump manufactured by Aipu including XL200, XL150 to meet customers’ request. You could choose a suitable one according actual conditions.

Usually, the mixing pump selection has relation with flow rate also the horse power. Then the design of system and the tank construction. Then we need to consider the tank storage capacity. And every 10-30 minutes the jet mud mixer should finish mixture capacity up to storage capacity

The mud mixing pump can improve drilling mud property effectively, saving cost and time. If you need or you are interested in mud mixing pump, please do not hesitate to contact us.
Mud mixing pump from Aipu solids control
image