Solids Control
Home > products > Desilter


Desilter is solids control equipment with a set of desilter cyclone to separate silt from drilling mud in drilling rigs. Desilter is installed on top of the mud tank following the desander. The desilter removes the abrasive solids around 15-44 micron.

Desilter Mud Desilter

Technical Parameters

Model APCN60 APCN90 APCN120 APCN200 APCN240 APCN320
Capacity 60m³/h 90m³/h 120m³/h 200m³/h 240m³/h 320m³/h
Desilter Cone 100x4(4" x4) 100x6(4" x6) 100x10(4" x10) 100x16(4" x16)
Working Pressure 0.25~0.45MPa
Separation Point 15~44μm
Bottom Shaker Hunter-D or Hunter-MG series
Vibration Mode Linear Motion or BEM
Motor Speed 1500rpm  or 1800rpm
Overall Dimension 1650x1250x1600mm 2450x1700x1700mm
Remark 4"Cone=12~15m³/h,5" Cone=20m³/h.  It can be configured according to clients' demand

 Main Features

  1. Clamp type for easy maintenance.
  2. Compact design with small footprint.
  3. Flexible options for quantity 2 to 20 for different capacities.
  4. Flexible fast connection are available for user friendly assembly.
  5. Tangentially blended into the cone entry as a narrow rectangle to minimizes turbulence in the upper section of the cone, allowing the solids to move quickly to the cone wall.