Drilling mud agitators are high-efficiency mud-mixing units which used for stirring drilling mud to maintain suspension of solids.
Choosing mud agitator should be closely integrated with the purpose of stirring operations.
Here is the right method and steps about how to choose mud agitator that can be combined with the actual needs of this reference, you can also make appropriate adjustments in accordance with the requirements, then after the final comprehensive consideration you can choose mud agitator you want.
First, according to the process conditions, the purpose and requirements of stirring, and choose with right design and suitable type. The stirrer is designed to select the type of mud. Flow state should be selected with a variety of types of mud agitator fully grasp the dynamic properties of the mud and mud agitator in the mixing process generated stir causation purposes.
After determining the current state of the slurry and the slurry stirrer type in the mixing process generated by the mixing process, the settling velocity, dispersion control requirements, and you can choose mud agitator by means of computer simulation experiment design. Choose mud agitator depending on the motor power, stirring speed, the diameter of the slurry stirrer.
When choose mud agitator in accordance with the output shaft of the first gear mode and mixing mud agitator shaft bearing, you should pay attention to choose the same model specifications rack coupling. Determining the type of shaft seal is also important to choose mud agitator. Selecting an agitator shaft head frame is according to the size of the accommodating space and installation work pressure, temperature selection.
