Slurry pump is vertical single stage, single suction cantilever type centrifugal pump structure, on the side of impeller suction extend place set agitating impeller, the main characteristics of slurry is the pump shaft of down liquid parts have enough stiffness, between impeller and shell don’t have set shaft seal, it can transport the medium of big density solid particles.
The following is the maintenance of submersible slurry pump.
1 Oil cup shall be filled with calcium base grease to ensure bearing can normal lubrication.
2 Submersible slurry pump used in the first month, or running after 100 hours, the butter in oil cup should be replaced, later once replacement after working every 2000 hours.
3 Pay attention to pump bearing temperature, should not be more than the outside temperature 35 degrees.
4 If discover noise or unusual noise in running process, we should check up in time.
Aipu Machinery is a professional manufacturer of solids control equipments, we will supply cost-effective submersible slurry pump and satisfactory pre-sale, sale and after-sale technical services. Any interest or questions please feel free to contact us.
