Mud cleaner is the main and important part for the oil drilling fields, and it is mainly used to separate the drilling mud. Now Aipu solids control will share mud cleaner working principles in the oil drilling fields.
Commonly, after the drilling solids have been drilled out, they could be putted into drilling mud tank or just lay out everywhere. In this situation, we will use centrifugal pump or screw pump to transport the drilling solids. Of course, we also need the shear pump to cut the drilling solids into small sizes so that they could be transported easily. After the drilling solids have been transported into the mud cleaner, then it’s the mud cleaner’s working time. Generally speaking, the drilling solids will go through the cyclone and separated by mud cleaner unit. After the step of cyclone, the solids will go through the steel frame shaker screen, with the different size of the shaker screen mesh, we will get the different solids with the help of shale shaker and shaker screen. After this step, we will transport the solids into the vacuum degasser to separate the gas to provide a safety working environment.
To be frank, the mud cleaner system working flow or working principle is simple, but it is important and necessary for the drilling fields and solid control system. Believe above content make you more clearly understand mud cleaner.
Please feel free to contact Aipu solids control if you have any interesting about mud cleaner system, we will always be here to support your demands.
