Shale shaker is used in the first phase of drilling purification in petroleum exploration and exploitation. It plays a critical role in the whole solids control system. Today we will give you some advice and tips about shale shaker selection.
1. The throwing index: the solids phase on the shaker screen is always in below moving modes, comparably stationary, positive sliding and negative sliding and throwing mode. A suitable throwing mode is 4-6, and it helps to ensure as much as solids phase is in throwing mode instead of stationary or sliding mode.
2. The angle of deck: the angle of deck determines the time of solids phase to stay on the shaker screens. Depending on the different drilling mud, it is good if the operator could change the deck angle during operation, Aipu Shale shaker allows the operator to change the deck angle from -1 to +5 degrees.
3. Vibrating motors: a good performance of vibrating motor gives enough vibrating force for the shale shaker, Aipu solids control use Italy Oil brand vibrating motors.
4. Vibrating pattern: among the Chinese shale shakers, the most moving route is linear motional, Aipu solids control has both linear motional shale shaker and balanced elliptical shale shaker available.
5. Shaker screens: if there is only good shaker without a good shaker screen, there is no meaning. Aipu solids control is not only a shale shaker manufacturer, but also owns a shaker screen factory in order to control the screen quality. Now some other brand shakers end users are sourcing screens from Aipu because of Aipu screens high cost-effectiveness.
Aipu shale shaker is reliable, good quality, all of our clients highly appreciated our products. If you are interested in shale shaker or need know more details about other solids control equipment, please feel free to contact us.
