Our Products
Comprehensive range of solids control equipment and drilling waste management solutions
Treatment System For Sludge With Oil
Oil sludge is a mixture consisting of oil, water and solids. The treatment on oil sludge would recover much oil and water for reuse.
View Details
Mud Cooling System
Mud cooling system is also referred to mud cooler It is very helpful for cooling down drilling mud and drilling tools during oil&gas exploration
View Details
Drilling Waste Management
All wells are drilled with generation of waste. Including drilling cuttings, waste water, spent drilling fluids, completion fluids, and filtration wastes and so on. With increasing legislation, public awareness and minimum operator environmental standards
View Details
Drilling Mud Solids Control System
Solids control system may contain shale shaker, vacuum degasser, desander, desilter, mud cleaner,decanter centrifuge, pump, mud agitator, mud gun, mud mixer, poor boy degasser, mud tank, etc. The systems will suit rig max drilling depth from 2000m to 9000
View Details
Drilling Rig Mats
Drilling rig mats is widely used in oilfield drilling. It’s portable platform used to support equipment used in construction and other resource-based activities, including drilling rigs, camps, tanks, and helipad. It may also be used as a structural roadw
View Details
Cuttings Boxes
Drilling cuttings boxes are also referred to mud skips Widely used for transportation and safe handling of drill cuttings or fluid waste to and from drilling site or platforms These units provide a safe and efficient means of containment of drilling waste
View Details
Screw Conveyor
Screw conveyor is also referred to Auger feeder. They can be used as the transfer unit of drilling cuttings to cuttings dryer, also the unit to transfer disposal to cuttings tank or collection container. The length can be custom built according to actual
View Details
Drying Shaker
The Hi-G drying shaker is specific shale shaker used in drilling waste management It can dewater the waste or cuttings efficiently lead cost cut down also better preparation for further treatment The dual tandem drying shaker is available upon clients dem
View Details
Vertical Cuttings Dryer
The Aipu cuttings dryer is designed for high-efficiency separation of drilling fluids, significantly reducing the content of drilling cuttings in these fluids. This dryer effectively lowers the disposal percentage, making it highly beneficial for zero-dis
View Details
Shale Shaker Screen
Shale shaker screen is the critical parts or spare parts for solids control system. It is screen panels fit on shale shakers. As shale shaker is the chief defense of solids removal during well drillings, screen quality will definitely affect shaker perfor
View Details
Mud Tank
A mud tank is an open-top container, typically made of square steel tube and steel plate, to store drilling fluid on a drilling rig.
View Details
Mud Gun
2 inch and 3 inch size low and high pressure mud gun for option, mud gun length can be customized, fixed nozzle or rotating nozzle.
View Details
Flare Ignitor Device
The flare ignition device is used to light the waste gas in oil and gas industry. it connected with poor boy degasser which separate gas from drilling mud and vent gas to flare ignition device.
View Details
Mud Gas Separator
Poor boy degasser is a equipment to treat the gas invade mud. If there is a “KICK” situation, this vessel separates the mud and the gas by allowing it to flow over baffle plates. The gas then is forced to flow through a line and vent it to a flare ignitio
View Details
Screw Pump
Screw pump listed here is mainly used to transfer drilling fluid or waste mud to decanter centrifuge or cuttings dryer. It’s a kind of progressive cavity pump and usually set on tank base or separately horizontally. According to different working conditio
View Details
Submersible Slurry Pump
Submersible slurry pump is widely used to transfer drilling mud to shaker or mud decanting centrifuge. The main feature of APYZ submersible slurry pump is in the liquid part of the pump shaft, there is enough stiffness, impeller, no bearings between the p
View Details
Shear Pump
Shearing pump is designed to reduce cost of mixing polymers and clays while improving mud properties, it shear the polymers eliminates fish eyes and prevents polymer chaining which can’t pass though the shaker screen
View Details
Jet Mud Mixer
Jet mud mixer is a type of equipment used in conjunction with the oil drilling solid control system, which can meet the requirements of weighting and preparing drilling fluid for solid control system sranging from 1500 meters to 7000 meters.
View Details
Centrifugal Pump
Centrifugal pump is widely used in the whole drilling mud system. Through complete solids control system, it is used as trip pump, desander pump, desilter pump, mixing pump, charging pump, and so on. Aipu provide complete line centrifugal pumps used in dr
View Details
Decanter Centrifuge
Decanter centrifuge is used to separate drilling cuttings out of drilling mud as the 5th phase cleaning in the whole solids control system. It is also referred to centrifuge decanter or decanting centrifuge. AIPU decanter centrifuge can provide a great pe
View Details
Mud Agitator
Mud agitators are necessary equipment for drilling mud tanks to mix drilling fluid during oil drilling at the oilfield. Both helical bevel gearbox and helical worm gearbox are available at AIPU for all sizes of mud tank agitators.
View Details
Centrifugal Degasser
APLCQ300 centrifugal degasser | atmospheric degasser accepts any fluid weight or mud viscosity, while the simple switch operation ensures rapid startup and shutdown.
Vacuum Degasser
Drilling mud vacuum degassers are used in the oil and gas industry to remove gas bubbles and other contaminants from drilling fluids. AIPU supply both vacuum degasser APZCQ series and centrifugal degasser APLCQ300 for customers’ optional.
View Details
Desilter
Desilter unit mainly removes 15~44μm solid phase particles in oil and gas drilling and is the main equipment in the solid control system. Different structure as desilter without downstream shale shaker, desilter with Hunter Mini shaker, desilter with Hunt
View Details
Desander
Desander is solids control equipment with a set of desander cyclone to separate sand from drilling mud in drilling rigs&peroid; Desander is installed on top of the mud tank following the shale shaker and vacuum degasser but before desilter&peroid; The des
View Details