The advantage of Aipu decanter centrifuge
Decenter centrifuge is used as the fourth stage solids control equipment after shale shaker, desender and desilter. It is also an important part of mud purification system. The centrifuge will be mainly used to retrieve barite, clear fine solids, decrease solid content of drilling fluids, control drilling mud density and performance. It is especially effective when used oilfield service industry, industrial service industry and especially in environmentally sensitive areas.
The advantage of decanter centrifuge
1. High degree of automation. The centrifuge produced by AIPU Machinery is continuous feed and continuous discharging. Under the action of the centrifugal force, the solid particles of mud are continuously discharged to spiral drum.
2. Good degritting effect. With many years development and production of centrifuge experience, and after a lot of test, optimized the settling zone parameters and feeding method, enhanced the degritting effect of centrifuge, performance can be comparable to the same specifications of the imported centrifuge.
3. Low energy consumption, light working load. Handing capacity increased 30% than original, but power does not increase. Furthermore, centrifuge with work, motor load no more than 80% of the rated power.
4. Working reliable, a long service life. Bearings are world famous FAG or SKF ensure user high quality and high performance. Drum and screw are made of high quality 304 or 316L lead centrifuge a long usable life. The discharge output welded by tungsten as anti-corrosive layer assure more durable.
5. Low noise, small vibration. Enhanced the machining precision and dynamic balance precision of drilling mud centrifuge rotation part.
6. Compact structure, a few spare parts, easy to install and maintain.
7. Adopt the frequency conversion governor, Compared with similar products with low power consumption, the working speed is adjustable.
The advantage of decanter centrifuge
1. High degree of automation. The centrifuge produced by AIPU Machinery is continuous feed and continuous discharging. Under the action of the centrifugal force, the solid particles of mud are continuously discharged to spiral drum.
2. Good degritting effect. With many years development and production of centrifuge experience, and after a lot of test, optimized the settling zone parameters and feeding method, enhanced the degritting effect of centrifuge, performance can be comparable to the same specifications of the imported centrifuge.
3. Low energy consumption, light working load. Handing capacity increased 30% than original, but power does not increase. Furthermore, centrifuge with work, motor load no more than 80% of the rated power.
4. Working reliable, a long service life. Bearings are world famous FAG or SKF ensure user high quality and high performance. Drum and screw are made of high quality 304 or 316L lead centrifuge a long usable life. The discharge output welded by tungsten as anti-corrosive layer assure more durable.
5. Low noise, small vibration. Enhanced the machining precision and dynamic balance precision of drilling mud centrifuge rotation part.
6. Compact structure, a few spare parts, easy to install and maintain.
7. Adopt the frequency conversion governor, Compared with similar products with low power consumption, the working speed is adjustable.
Related Products
