Flare ignitor classification

The exploration of petroleum and natural gas is very complex. The flare ignitor device is indispensable for preventing breaking-out, and rescue out of control after blowout. Formerly, using the magic bullet firing fireworks, since spout flow is very large and the ejective with water, sand, and, etc. it is difficult to ignite. At present, we usually used flare ignitor device can ignite with many times, but there is a common problem that is igniting distance is very short. Flare ignitor device must be placed closer to combustion nozzle.

Remote control jet ignition device
According to the need of process of drilling blowout ignition and blowout ignition, referring to principle of flame spray gun, we successfully achieve safe and reliable, remote control jet ignition to meet high pressure, high production, natural gas with sour gas well blowout ignition request on scene.

Track type remote electronic ignition device
1. Combustion flame of ignition device is large and long can ensure immediately igniting gas from high pressure spouting.
2. High technology automation, adopt distance remote control operation. Ignition car forward, backward, oil, valve open, ignition all are controlled automatically.
3. After ignite discharge combustible gas, the car can leave the high temperature zone quickly to ensure its safety.
4. The device adopts a battery supply, can still work during a power outage.
5. Due to the use of the DC low voltage power supply (battery), safety, avoiding accidents.
6. The device is equipped with two sets of gas source, one is to use the compressed air, the other is emergency bottle. So when in the event of an emergency power outage, we can still ignite normally.
7. Horizontally mounting, good safety. Convenient to install and repair.